Aremco-Bond 526-N Epoxy for Tough Bonding Applications, Pint
Aremco-Bond 526-N Epoxy for Tough Bonding Applications, Pint by Graphtek at Syl Shop. MPN: 526-N. Hurry! Limited time offer. Offer valid only while supplies last. Aremco-Bond 526-N is an unfilled, 100% solids, 1-to-1 mix ratio, high performance epoxy system that can be used continuously at temperatures to
Product Description
Aremco-Bond 526-N is an unfilled, 100% solids, 1-to-1 mix ratio, high performance epoxy system that can be used continuously at temperatures to 570°F (300°C). Provides excellent mechanical and electrical properties.
Aremco-Bond 526-N exhibits exceptional adhesion to ceramics, glass, metals and plastics substrates, and demonstrates outstanding chemical resistance to acids, alkalis, organic fluids and salts.
Aremco-Bond 526-N passes the ASTM E-595 outgassing test, a particularly important requirement for aerospace manufacturers concerned with material outgassing properties. The TML (total mass loss) at 125 °C is 0.94 and CVCM (collected volatiles condensable) at 25°C is 0.00.
Aremco-Bond 526-N is cured fully after setting at 325 °F for 2-4 hours. The cured Shore-D hardness is 89 and shrinkage is less than .01.
Aremco-Bond 526-N exhibits exceptional adhesion to ceramics, glass, metals and plastics substrates, and demonstrates outstanding chemical resistance to acids, alkalis, organic fluids and salts.
Aremco-Bond 526-N passes the ASTM E-595 outgassing test, a particularly important requirement for aerospace manufacturers concerned with material outgassing properties. The TML (total mass loss) at 125 °C is 0.94 and CVCM (collected volatiles condensable) at 25°C is 0.00.
Aremco-Bond 526-N is cured fully after setting at 325 °F for 2-4 hours. The cured Shore-D hardness is 89 and shrinkage is less than .01.
Additional Information
| Manufacturer: | Graphtek |
| Model: | ARMC-526-N |
| Part Number: | 526-N |
| Publisher: | Graphtek |
| Studio: | Graphtek |
| MPN: | 526-N |