Aremco-Bond 568 Epoxy - Good Bond Strength and High Thermal Conductivity, Pint
Aremco-Bond 568 Epoxy - Good Bond Strength and High Thermal Conductivity, Pint by Graphtek at Syl Shop. MPN: 568. Hurry! Limited time offer. Offer valid only while supplies last. Aremco-Bond 568 is an aluminum-filled, two-component (resin:hardener) epoxy paste for special purposes. Provides excellent mechanical strength, high
Aremco-Bond 568 is an aluminum-filled, two-component (resin:hardener) epoxy paste for special purposes. Provides excellent mechanical strength, high thermal conductivity and good bond strength to 400°F (204°C).
Aremco-Bond 568 should be mixed thoroughly in 1:1 ratio (by weight) to a uniform consistency. Requires curing for 2 hours at 200°F (recommended) or for 24-48 hours at room temperature. In most cases, the epoxy should be applied to both surfaces maintaining a glue line of less than 10 mils.
On the picture Aremco-Bond 568 bonds copper coil.
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Graphtek, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Aremco-Bond 2310 is an ultra high bond strength two-part (1:1) epoxy. Ceramic-filled, high lap shear and peal strength, autoclavable.Mixed viscosity is 45,000 centipoise (cP) and the pot life for a 100 gram mass is approximately 45 minutes. Recommend...
Aremco-Bond 526-N is an unfilled, 100% solids, 1-to-1 mix ratio, high performance epoxy system that can be used continuously at temperatures to 570°F (300°C). Provides excellent mechanical and electrical properties.Aremco-Bond 526-N exhibits except...
By Royal Adhesives
mpn: 04009, ean: 0701748588163,
HARDMAN Double Bubble Silver-Label Epoxy 04004 Crystal-Clear (Clear as Water) is a two component, room temperature cure epoxy adhesive designed with a unique feature, dries totally transparent. It contains no solvents, and can also be used as a coati...
3M(TM) Scotch-weld(TM) Structural Plastic Adhesive DP8010 is a two-part acrylic-based adhesive....
mpn: 38081, ean: 0051131380813,
Ready-to-use blend of petroleum solvents designed to remove adhesive and tar deposits from exterior vehicle surfaces. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface.Specially blended solvent. Quickly re...
By Royal Adhesives
mpn: 04023, ean: 0687927955738,
By Fiberglass Coatings
Special Shipping Information: This product may not be available for expedited shipping due to federal regulations that require it to ship via ground ship methods only (Delivery dates may vary from estimated delivery date). This product can only be sh...
mpn: 58308, ean: 0076308583088,
Two-part epoxy for use in vertical or horizontal seams to match OEM sealers. Non-sagging, non-flowing, and easy to tool. Paintable in 15 minutes, work time, 6 minutes. No shrinkage or cracking.A high performance two component epoxy seam sealer; black...
Aremco-Bond 805 is an aluminum-filled, two-component (resin:hardener) epoxy paste for specialty bonding, molding and potting applications to 570°F (300°C). Provides low shrinkage, high thermal conductivity and excellent mechanical strength.Aremco-B...
mpn: DP-605NS-Off-White, ean: 0734034396272,
3M(TM) Scotch-Weld(TM) Urethane Adhesive 605NS is a semi-rigid, non-sag, two-part urethane. 1:1 mix ratio, 5 minute work life and handling strength in 20 minutes....