Epoxy Superbond Resin, 2 Gallon Kit, Fast Cure Includes Part A & B

This is a two component, 100% solids, epoxy, resin system designed for adhesive bonding and the "fitting and fairing" of a wide variety of substrates including wood, metal, glass and composite plastics. This material features a forgiving, easy to use, 1 to 1 by volume mix ratio (1 Part Epoxy to 1 Part of Activator by Volume). The material itself features a highly thixotropic paste-like consistency, which hangs well in thick sections on vertical and overhead surfaces. The material can be used with any one of our 3 Activators, which differ only in curing time. (Cure time may also be accelerated by mild heat up to 150 F.) The material cures to a hard, blush free, amber colored plastic, having good physical properties such as water chemical and solvent resistance; high adhesive strength; and high dielectric strength for electrical insulation. With all adhesive type compounds, proper surface preparation is essential for good bond strength. Additional recoating of this material should be accomplished before the material is thoroughly cured, generally in less than 24 hours. If the material has cured hard and tack free, a light sanding and solvent wash may be necessary before recoating. THIS MATERIAL IS FOR PROFESSIONAL USE ONLY, using adequate ventilation and protection from eye and skin exposure. Any information supplied with this material is given in good faith but should be verified by the end user, as is the suitability of the material for their application. The warranty of this material shall be limited to the replacement of defective material. IN EPOXIES, PARTS A & B CHEMICALLY BOND on a molecular level turning a liquid into a solid. This makes mixing thoroughly, imperative. Do not use a power mixer which will insert air, but, mix with a stick for about three minutes. Pour into a second container to eliminate unmixed material stuck to the sides. To polymerize 100%, thorough mixing places part A molecules next to part B molecule for bonding. .

Browse Our Catalog.

View More In Adhesives.

High temperature one-part alumina-based adhesive for bonding and sealing dense ceramics used in design, process and maintenance applications up to 3000°F (1650°C). Typical applications for Ceramabond 503 include the assembly of dense ceramic compon...

Aremco-Bond 568 is an aluminum-filled, two-component (resin:hardener) epoxy paste for special purposes. Provides excellent mechanical strength, high thermal conductivity and good bond strength to 400°F (204°C).Aremco-Bond 568 should be mixed thorou...

Aremco-Bond 2310 is an ultra high bond strength two-part (1:1) epoxy. Ceramic-filled, high lap shear and peal strength, autoclavable.Mixed viscosity is 45,000 centipoise (cP) and the pot life for a 100 gram mass is approximately 45 minutes. Recommend...

Aremco-Bond 526-N is an unfilled, 100% solids, 1-to-1 mix ratio, high performance epoxy system that can be used continuously at temperatures to 570°F (300°C). Provides excellent mechanical and electrical properties.Aremco-Bond 526-N exhibits except...

HARDMAN Double Bubble Silver-Label Epoxy 04004 Crystal-Clear (Clear as Water) is a two component, room temperature cure epoxy adhesive designed with a unique feature, dries totally transparent. It contains no solvents, and can also be used as a coati...

3M(TM) Scotch-weld(TM) Structural Plastic Adhesive DP8010 is a two-part acrylic-based adhesive....

Ready-to-use blend of petroleum solvents designed to remove adhesive and tar deposits from exterior vehicle surfaces. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface.Specially blended solvent. Quickly re...

Special Shipping Information: This product may not be available for expedited shipping due to federal regulations that require it to ship via ground ship methods only (Delivery dates may vary from estimated delivery date). This product can only be sh...

Two-part epoxy for use in vertical or horizontal seams to match OEM sealers. Non-sagging, non-flowing, and easy to tool. Paintable in 15 minutes, work time, 6 minutes. No shrinkage or cracking.A high performance two component epoxy seam sealer; black...