Fibre Glast Marine Epoxy Fairing Compound - Gallon Kit
Fibre Glast Marine Epoxy Fairing Compound - Gallon Kit by Fibre Glast at Syl Shop. MPN: 04118-B. Hurry! Limited time offer. Offer valid only while supplies last. #4118 Epoxy Fairing Compound is a smooth, creamy paste system for fairing surface imperfections on composites, wood, and primed metal parts, boasting
#4118 Epoxy Fairing Compound is a smooth, creamy paste system for fairing surface imperfections on composites, wood, and primed metal parts, boasting excellent bonding during cure. This tough Epoxy Fairing Compound can be used to fill voids and provides a smooth transition in offset or stepped areas. It is also specially formulated for easy sanding and is moisture resistant, so the cured surface is blush-free and won't gum sandpaper during finishing.This compound comes as a two-part kit and is mixed in an easy 1:1 volumetric ratio. Resin is off-white and hardener is gray. Once a complete mix is achieved, easily spread the creamy paste onto damaged or rough areas to create a smooth, cosmetic surface.#4118 Epoxy Compound cures to be slightly flexible, which helps to resist cracking under stress or vibration for thin layers. However, if necessary, it can applied up to 1-1/2 inches thick-special "wet" spreadable viscosity prevents nearly any sagging, even at elevated temperatures.Pot Life: 85-95 minutesMix Ratio: 100:65 (by weight); 1:1 (by volume)Cures at room temperature-no heat required for full cureAllow 4-5 hours (only) between multiple layers (at 77F)Finish sand in 16-18 hoursLightly sand before applying primer/paint
Features & Highlights
- Fix surface imperfections on your part
- Repair and smooth nearly any surface
- Specially formulated for easy sanding and moisture resistant
- Create a smooth, cosmetic finish on your repair
- Gallon Kit
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Fibre Glast, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Fibre Glast
mpn: 3300/3330-B, ean: 0802390001205,
For high performance, high temperature composite tooling that will provide excellent long term service in high temp curing cycle environments, use this High Temp Tooling Epoxy. When post-cured, this unfilled, amber epoxy laminating resin system offer...
Includes: 3M 04747 Duramix Super Fast Adhesive - 50 ml - Super fast-setting adhesive which does not require a separate accelerator like cyanoacrylate adhesives. Has excellent wide gap filling capabilities and withstands a wide range of temperatures. ...
mpn: 401CK-T, ean: 0677917008155,
Includes two gallons of water based bonding adhesive, 150' of butyl tape used to seal around all the accessories and molding. Each kit comes with easy to follow instructions. Tan.Includes two gallons of water based bonding adhesive. Each kit comes wi...
By PC Products
mpn: 128114, ean: 8302409850241,
'Epoxy Adhesive, Marine Grade, High Strength Paste, Off White, 8 Lb, Can, Mixing Ratio 1:1, Temp. Range -20 to 200 F, Application Time 20 Min, Functional Cure 12 Hrs, Full Cure 24 Hrs., Work Life 35 Min, Shear Strength 1710 PSI, Substrates Metal, Woo...
mpn: 1217349, ean: 8309226567826,
This item is designed to fit specific vehicles. Please ensure correct part fitment before purchasing this project. Contact the seller directly for additional product information and availability.URETHANE TUBE.Comes with full manufacturer warranty. Fi...
By Cross Check
mpn: 83319, ean: 0781155440957,
DYKEM® Cross-CheckTM provides a convenient visual method for identification of vibratory loosening or tampering in nuts, bolts, fasteners, and assemblies. Provides warranty protection against tampering. Marks will be easily broken if parts are tampe...
mpn: 55847-6PK, ean: 0076308558475,
This nozzle's active mixing action completely blends materials, and its short length guarantees low waste. Developed for use with 3M adhesives and sealers packaged for the dynamic mixing system.This nozzle's active mixing action completely blends mat...
DuratecÆ Clear High Gloss Additive can be mixed in a 1:1 ratio with regular gel coat to reduce viscosity and porosity, improve gloss level, and permit a complete open-air cure. It can also be blended with a 15% ratio to tooling gel coats to upgrade ...
By AP Products
mpn: 017-106449, ean: 0613652253979,
Adhesive Sealant; Sikaflex (R)-221; Used For Truck/ Trailer/ RV And Bus Manufacturing; 300 Milliliter; Colonial White; Polyurethane Sealant; With Cut And Tear Resistance/ Resist Shocks/ Weather Resistant/ Sandable And Paintable10 PACK. Color: Colonia...
mpn: 12005, ean: 0613652253481,
Adhesive; Hi-Heat; 16.75 Ounce Aerosol Cans6 PACK. Unit Size: 16.75 Ounce Aerosol Can. Metallic Based Coating For Performance Enhancement. Fast-Drying, Quick-Bonding, High Temperature Contact Adhesive. Use It Wherever You Need A Secure, Long-Lasting,...