Renewable Lubricants Bio-Ultimax 1000 ISO 46 Hydraulic Lubricant, 5 Gallon Pail

Renewable Lubricants Bio-Hydraulic fluids, Bio-Ultimax 1000 is ultimately biodegradable vegetable based formulas that replace mineral oil based hydraulic fluids. Bio-Ultimax hydraulic fluids are formulated to perform in hydraulic systems that require Anti-Wear (AW), anti-rust, anti-oxidation, anti-foam, and demulsibility properties. They are highly inhibited against moisture and rusting in both fresh and sea water and pass both A and B sequences of the ASTM D-665 turbine Oil Rust Test. Incorporating the super high viscosity index of the Stabilized High Oleic Base Stocks (HOBS) into the formula, increases the viscosity index past synthetic levels (Energy Conserving Formulas). Zinc-free additive systems have also been developed that are environmentally friendly and meet or exceed pump requirements. Bio-Ultimax hydraulic fluids are designed for use in mobile and stationary hydraulic vane, piston, and gear-type pumps and have shown to have exceptional anti-wear performance. Very little wear was encountered, 0 to 25mg (Pass), in accelerated biobased tests using Denison T-5D, vickers 20VQ, 35VQ-25 (M-2950-S), and V-104C (ASTM D-2882) pump stand tests at pressures and temperatures ranging from 2000 to 3000 psi and from 150 to 210 degree F. The anti-wear performance exceeds the requirements for US Steel 126 and 127, load stage 10 in the FZG (DIN 51354), DIN 51524, and GM (LS-2). They also meet the requirements for ashless GL-3 gear oils in reduction units and gear sets where they meet the viscosity ranges. Bio-Ultimax AW 1000 meets and exceeds Federal Specifications A-A-59354 Superseding MIL-H-46001D.

View More In Hydraulic Oils.

Or Browse Our Catalog.

Maxima's Synthetic Racing Shock Fluid (SYN RSF) is an ester-based, 100 percent full synthetic race-grade shock fluid formulated to withstand extreme temperatures and loads. SYN RSF is blended to the tight specifications required by racing professiona...

Sinopec Tulux T600 15W-40 is Syn Diesel Engine Oil formulated with advanced low-SAPS (sulfated ash, phosphorus and sulfur) multifunctional additives formulated to meet the latest requirements of a wide range of engine manufacturers. Suitable for use ...

Sinopec Anti-wear Hydraulic Oil ISO VG 32 is a premium light weight paraffinic based hydraulic oil, ideal for industrial applications or for the hydraulic systems in cold weather regions. It is a rust and oxidation (R&O)-inhibited oil with the added ...

Sinopec antiwar hydraulic oil ISO vg 46 is a premium mid weight hydraulic oil, ideal for industrial or equipment applications. It's a multipurpose hydraulic, suitable for most hydraulic needs. It is a rust and oxidation (r&o)-inhibited oil with the a...

Proven field tests performance on 250 pieces of equipment over 250,000 hours of operation on John Deere, New Holland, Ford, J. I. Case, International Harvester, Massey-Ferguson and Kubota tractors.  - Outstanding thermal and oxidative stability- Exc...

Proven field tests performance on 250 pieces of equipment over 250,000 hours of operation on John Deere, New Holland, Ford, J. I. Case, International Harvester, Massey-Ferguson and Kubota tractors.  - Outstanding thermal and oxidative stability- Exc...

Sinopec Antiwear Hydraulic Oil ISO VG 32 is a premium light weight hydraulic oil, ideal for industrial applications or for the hydraulic systems in cold weather regions. It is a rust and oxidation (R&O)-inhibited oil with the added benefit of an anti...

Duragard® Arctic Blue Hydraulic Oil is formulated with high viscosity index (HVI) base oils and a precise balance of additives to deliver excellent low temperature properties, oxidation control, wear protection, resistance to rust, corrosion and foa...

Maxima Fork Oils are formulated from the highest quality base oils and advanced additives to prevent foaming, seal hardening, oxidation and “stiction”. Lubricinol provides for very low sliding friction and protects internal components from wear. ...

Pentosin CHF 202 is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 202 is especially designed for hydraulics in the automotive industry with the highest technical requirements such as...