Vibra-TITE 137 Permanent High Temperature and High Strength Anaerobic Threadlocker, 1 liter Jug, Red
Vibra-TITE 137 Permanent High Temperature and High Strength Anaerobic Threadlocker, 1 liter Jug, Red by Vibra-TITE at Syl Shop. MPN: 13700. Hurry! Limited time offer. Offer valid only while supplies last. Vibra-TITE 137 High Temp-High Strength Threadlocker is a red single component anaerobic threadlocker. 137 joins threaded parts exposed to operating
Vibra-TITE 137 High Temp-High Strength Threadlocker is a red single component anaerobic threadlocker. 137 joins threaded parts exposed to operating temperatures up to 450 degree F. It offers excellent performance at temperatures more the 150 degree higher than other threaded locking products because of its enhanced chemistry. Applications include high temperature locking and sealing of studs, nuts, screws, bolts, and fittings. Parts are locked and sealed against leakage, contamination and corrosion. The higher viscosity is more suitable for large diameter, coarse threaded parts. It is recommended for parts that do not require routine maintenance as disassembly is difficult and may require heat. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle onto threaded parts. Fixture Speed with Primer is <5 seconds. Fixture Speed without Primer is 30 minutes at 77 degree F. Shelf Life is 12 months at 68 degree F. 24 hours at 68 degree F Full Cure Time. 150-250 inches/lbs Typical Breakaway Strength. 50-150 inches/lbs Typical Prevailing Strength. Product should be stored in a cool and dry location at temperatures between -10 degree C to 30 degree C. Optimal storage is 22 +/- 4 degree C. Shelf life is 18 months from date of manufacture when stored at 22 +/- 4degree C. Suitable for applications where disassembly is not required. Permanently locks nuts or bolts up to 1-1/2'' in diameter. Heat and hand tools required for disassembly. 0.007 inches Maximum gap fill. 300/250 lbs Torque strength, Break/Prevail. 1.11 Specific gravity. N or T Suggested primer. 1 liter Jug.
Features & Highlights
- Lock and seal threaded fasteners
- Stop fasteners from loosening from shock and vibration
- Performs better than lock washers, bevel washers and other forms of mechanical locking devices
- Alleviates rust-lock
- Prevent leakage
|Package Weight:||2.55 pounds|
|Package Size:||4.4 x 3.9 x 3.9 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Vibra-TITE, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 42805, ean: 0048615428055,
Oxygen piping systems need a specially formulated thread sealant, and OXY-TITE is the perfect product for these sensitive systems. Each batch of OXY-TITE is tested to the stringent standard of ASTM G-72.PTFE thread sealant specifically formulated for...
mpn: 42000, ean: 0745619420008,
Vibra-TITE 420 Instant Pipe Sealant is a slow curing sealant but provides an instant seal on tightened fittings. Initially the material seals against moderate pressure of up to 150 psi. This product is anaerobic with no solvents and no shrinkage whic...
Loctite 569 brown thread sealant is compatible with metal materials with a 24 hr cure time. Delivers great performance with tensile strength of 24 psi. Minimum to maximum operating temperatures are -65 F to +300 F.Sale Unit: BOTTLE. Brand: Loctite. L...
mpn: 12100, ean: 0745619121004,
Vibra-TITE 121 Medium Strength Threadlocker is a general purpose product. 121 will hold all metric, imperial or conventional sized nuts and bolts, meeting the requirements of over 80 percent of fastening applications. It does not run off or drip and ...
mpn: 079340-27270-BO, ean: 0079340272705,
Loctite 272 red threadlocker is compatible with metal materials with a 24 hr cure time. Delivers great performance with a shear strength of 2900 psi and tensile strength of 200 psi. Minimum to maximum operating temperatures are -65 F to +450 F.Sale U...
mpn: 44400, ean: 0745619444004,
Vibra-TITE 444 High Pressure Threadsealant is a medium strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2" in diameter, resisting high pressure and vibrational loosening. This product has excellent solvent resistance and ...
Threadlocker 277 is a high strength adhesive for locking and sealing large bolts and studs 1 inch (25 millimeter) or larger in diameter. Heat may be required to weaken bond before parts can be disassembled. Typical applications include frame brackets...
By J-B Weld
mpn: 29006-24pk, ean: 0043425290069,
J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners .Ideal on mechanical parts, body assemblies and hundreds of other applications to prevent loosening of fasteners from shock and vibration .The perma-lock low ...
Permatex Penetrating Grade Threadlocker Green Formula is a low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are si...
Loctite 243 Medium Strength Surface Insensitive thread locker features a general purpose, medium strength, blue thread locker with a high oil tolerance. It has a higher temperature range than all the other blue thread lockers at 360F. For fasteners b...