Adhesives - 23 - Page 7 - Huge Savings! Save up to 19%
Huge Savings! Up to 19% off on Adhesives at Syl Shop, Page 7. Top brands include Devcon, Q-BOND USA, C.R. Laurence, Fibre Glast, 3M, Dicor, PC Products, CRL, Cross Check, PPS, Duratec, AP Products, Thermo-Tec, Hardman Double Bubble Epoxy, Fiberglass Coatings, & Graphtek. Hurry! Limited time offers. Offers valid only while supplies last.
Medium Strength Blue Threadlockers, 10 mL, 3/4 in Thread, Blue (13 Pack)
mpn: 230-24210, ean: 0714637718121,
4.0 out of 5 stars with 178 reviews
All-purpose, medium strength threadlocker Ideal for all nut and bolt applications 1/4 inch to 3/4 inch (6mm to 20mm) Eliminates the need for stocking expensive lock nuts and lock washers Locks and seals while preventing parts from loosening due to vibration Protects threads from corrosion Removable with hand tools for easy disassemblyDEVCON. 230-24210. Medium Strength Blue Threadlockers, 10 mL, 3/4 in Thread, Blue.
NIB 10/PACK Q-BOND USA QB2 SMALL REPAIR KIT 2-PART ADHESIVE SYSTEM AUTH DEALER
4.4 out of 5 stars with 147 reviews
Quick Bonding Ultra Strong AdhesiveQuick Bonding Ultra Strong Adhesive. Contains Adhesive and Filling Powders. Rock Hard in 10 Seconds!. Black powder is designed for hard plastics, grills, lugs, bumpers, radiators, and distributor caps.. Grey powder is made for metal surfaces, motorcycle fairings, carburetors, aluminum, office equipment, and petrol/oil resistant..
CRL Essex U208HV Betaseal Express Advanced Cure Urethane - 10 pcs (Case)
4.5 out of 5 stars with 178 reviews
Dow U208HV Betaseal Express Advanced Cure Urethane Adhesive delivers fast drive away times at low cost. This advanced cure polyurethane adhesive provides safe drive away in one hour at temperatures as low as 0° F (-17.8°C) and warmer. Dow Betaseal Express meets all OEM requirements, including long term durability. Prepare the windshield with U5500 Betaprime Glass Primer. Use U5404 Betaprime Pinchweld Primer on the pinchweld if the metal was scratched during glass removal.Quantity: 10
Fibre Glast Marine Epoxy Fairing Compound - Gallon Kit
mpn: 04118-B, ean: 0802390001090,
4.3 out of 5 stars with 119 reviews
#4118 Epoxy Fairing Compound is a smooth, creamy paste system for fairing surface imperfections on composites, wood, and primed metal parts, boasting excellent bonding during cure. This tough Epoxy Fairing Compound can be used to fill voids and provides a smooth transition in offset or stepped areas. It is also specially formulated for easy sanding and is moisture resistant, so the cured surface is blush-free and won't gum sandpaper during finishing.This compound comes as a two-part kit and is
Dicor 401CK-T Rubber Roof Kit
You Save: 5%
mpn: 401CK-T, ean: 0677917008155,
4.2 out of 5 stars with 42 reviews
Includes two gallons of water based bonding adhesive, 150' of butyl tape used to seal around all the accessories and molding. Each kit comes with easy to follow instructions. Tan.Includes two gallons of water based bonding adhesive. Each kit comes with easy to follow instructions. Tan color. Six 10.3 ounce tubes of lap sealant. Includes 150' of butyl tape used to seal around all the accessories and molding.
Epoxy, Marine Grade, White, 8 Lb Can
mpn: 128114, ean: 8302409850241,
4.7 out of 5 stars with 28 reviews
'Epoxy Adhesive, Marine Grade, High Strength Paste, Off White, 8 Lb, Can, Mixing Ratio 1:1, Temp. Range -20 to 200 F, Application Time 20 Min, Functional Cure 12 Hrs, Full Cure 24 Hrs., Work Life 35 Min, Shear Strength 1710 PSI, Substrates Metal, Wood, Brick, Stone, Marble, Rubber, Some Plastics, And More, Repairing and Bonding For Home, Farm, Office and Marine Automotive'Price For: Each Temp. Range (F): -20 Degrees to 200 Degrees Item: Epoxy Adhesive Epoxy Max. Temp: 200 Degrees to 249 Degrees
CR Laurence 1217349 Urethane Tube
mpn: 1217349, ean: 8309226567826,
4.4 out of 5 stars with 46 reviews
This item is designed to fit specific vehicles. Please ensure correct part fitment before purchasing this project. Contact the seller directly for additional product information and availability.URETHANE TUBE.Comes with full manufacturer warranty. Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information).
Dykem - Cross Check White Torque Seal - 1 Ounce Tube (24 PACK)
mpn: 83319, ean: 0781155440957,
4.7 out of 5 stars with 47 reviews
DYKEM® Cross-CheckTM provides a convenient visual method for identification of vibratory loosening or tampering in nuts, bolts, fasteners, and assemblies. Provides warranty protection against tampering. Marks will be easily broken if parts are tampered with or become loose. Highly visible marks. Excellent adhesion to metal and other substrates.Tamper Proof Torque Mark. Safe for most surfaces. Highly visible. Excellent adhesion. Visually detects loose nuts & bolts.
3M 55847 Dynamic Mixing Adhesive Nozzle
You Save: 19%
mpn: 55847-6PK, ean: 0076308558475,
4.6 out of 5 stars with 22 reviews
This nozzle's active mixing action completely blends materials, and its short length guarantees low waste. Developed for use with 3M adhesives and sealers packaged for the dynamic mixing system.This nozzle's active mixing action completely blends materials. Its short length guarantees low waste. Developed for use with 3M adhesives and sealers packaged for the dynamic mixing system.
Fibre Glast - Duratec Clear Hi-Gloss Gel Coat Additive - Gallon
4.6 out of 5 stars with 249 reviews
DuratecÆ Clear High Gloss Additive can be mixed in a 1:1 ratio with regular gel coat to reduce viscosity and porosity, improve gloss level, and permit a complete open-air cure. It can also be blended with a 15% ratio to tooling gel coats to upgrade mold surfaces, improve gloss retention, increase impact resistance, and reduce heat distortion.The reduction in viscosity allows gel coats to be sprayed controllably through siphon and HVLP equipment, reducing sanding and polishing time. When used
AP Products 017-106449 Sikaflex 221, Colonial White (10)
mpn: 017-106449, ean: 0613652253979,
4.9 out of 5 stars with 93 reviews
Adhesive Sealant; Sikaflex (R)-221; Used For Truck/ Trailer/ RV And Bus Manufacturing; 300 Milliliter; Colonial White; Polyurethane Sealant; With Cut And Tear Resistance/ Resist Shocks/ Weather Resistant/ Sandable And Paintable10 PACK. Color: Colonial White.
Thermo-Tec 12005 Spray-On Adhesive - 16.75 oz. (6)
mpn: 12005, ean: 0613652253481,
4.0 out of 5 stars with 26 reviews
Adhesive; Hi-Heat; 16.75 Ounce Aerosol Cans6 PACK. Unit Size: 16.75 Ounce Aerosol Can. Metallic Based Coating For Performance Enhancement. Fast-Drying, Quick-Bonding, High Temperature Contact Adhesive. Use It Wherever You Need A Secure, Long-Lasting, Easy-To-Apply Bond.
Epoxy Superbond Resin, 2 Gallon Kit, Fast Cure Includes Part A & B
4.0 out of 5 stars with 275 reviews
This is a two component, 100% solids, epoxy, resin system designed for adhesive bonding and the ''fitting and fairing'' of a wide variety of substrates including wood, metal, glass and composite plastics. This material features a forgiving, easy to use, 1 to 1 by volume mix ratio (1 Part Epoxy to 1 Part of Activator by Volume). The material itself features a highly thixotropic paste-like consistency, which hangs well in thick sections on vertical and overhead surfaces. The material can be used
Ceramabond 503 Alumina Adhesive, Quart
4.4 out of 5 stars with 156 reviews
High temperature one-part alumina-based adhesive for bonding and sealing dense ceramics used in design, process and maintenance applications up to 3000°F (1650°C). Typical applications for Ceramabond 503 include the assembly of dense ceramic components used in ultra high vacuum equipment, repairing of ceramic sager plates used in furnaces, potting thermocouples and gas sensors, and coating platinum/rhodium resistance wires to alumina heater cores.The product must be step cured at 200°F
Aremco-Bond 568 Epoxy - Good Bond Strength and High Thermal Conductivity, Pint
4.5 out of 5 stars with 76 reviews
Aremco-Bond 568 is an aluminum-filled, two-component (resin:hardener) epoxy paste for special purposes. Provides excellent mechanical strength, high thermal conductivity and good bond strength to 400°F (204°C).Aremco-Bond 568 should be mixed thoroughly in 1:1 ratio (by weight) to a uniform consistency. Requires curing for 2 hours at 200°F (recommended) or for 24-48 hours at room temperature. In most cases, the epoxy should be applied to both surfaces maintaining a glue line of less than 10
Aremco-Bond 2310 Epoxy - High Lap Shear and Peel Strength, Pint
4.7 out of 5 stars with 269 reviews
Aremco-Bond 2310 is an ultra high bond strength two-part (1:1) epoxy. Ceramic-filled, high lap shear and peal strength, autoclavable.Mixed viscosity is 45,000 centipoise (cP) and the pot life for a 100 gram mass is approximately 45 minutes. Recommended cure is 2 hours at 150°F or 48 hours at room temperature. Cured product exhibits a linear shrinkage of .003 in/in and Shore-D hardness of 85..
Aremco-Bond 526-N Epoxy for Tough Bonding Applications, Quart
4.7 out of 5 stars with 145 reviews
Aremco-Bond 526-N is an unfilled, 100% solids, 1-to-1 mix ratio, high performance epoxy system that can be used continuously at temperatures to 570°F (300°C). Provides excellent mechanical and electrical properties.Aremco-Bond 526-N exhibits exceptional adhesion to ceramics, glass, metals and plastics substrates, and demonstrates outstanding chemical resistance to acids, alkalis, organic fluids and salts.Aremco-Bond 526-N passes the ASTM E-595 outgassing test, a particularly important
Browse Our Catalog